Water softener size calculator
Softener "size" means grain capacity: how many grains of hardness it removes before it must regenerate. Here's the standard method, and a calculator to do it for you.
The formula
- Hardness in gpg. If your report is in mg/L, divide by 17.1.
- Compensated hardness. Iron uses up softener capacity too. A common manufacturer rule, used in some softener manuals, adds about 5 gpg for each 1 mg/L of clear-water iron (some makers use 4). Check your model's manual.
- Daily water use. People × gallons per person per day. Penn State's example uses 75 gallons; the Water Quality Association suggests starting at about 70 gallons of indoor use. Your water bill gives your real number.
- Grains per day = daily water use × compensated hardness.
- Capacity needed = grains per day × days you want between regenerations.
Rated capacity vs. real capacity
Advertised capacities are usually measured at a high salt setting. The WQA's sizing guidance recommends starting from the lowest salt level in the manufacturer's capacity table and aiming for efficiency of about 3,350 grains removed per pound of salt. In practice, that means the efficient capacity of a "32,000-grain" unit can be well below 32,000, so check the manufacturer's capacity table for the salt setting you plan to use, and round up to the next size.
Other things to check
- Iron limits. Penn State notes that oxidized (red) iron fouls softener resin, so it should be filtered out first.
- Flow rate. The unit must keep up with peak use (several fixtures at once). The WQA notes tank size and backwash flow also need to suit the home's water supply.
- Septic systems. Each regeneration uses roughly 50 gallons of water (Penn State).
- Bypass outdoor taps. WQA notes softened water shouldn't be used for irrigation, so outdoor spigots are usually bypassed.
Compare systems
With your capacity number, compare models from sellers such as SpringWell or Aquasana, and look for each model's capacity at different salt settings.